Monthly Archives: February 2015

Spotlight showing a path or opening immediately after finding a file.

I think this will be quite useful if you are using Mac. Just type command+enter after finding the file you are looking for. It will then bring you to the folder where contains the file. Pretty convenient hah?

Original source from: http://www.cultofmac.com/273623/spotlight-potential-see-full-file-path-found-documents-os-x-tips/

Spotlight is crazy useful to find stuff on your Mac. Just hit Command-Space on your keyboard and type in the name of files, words from in text files, the kind of document you want, or even the date when you think it might have been created or modified, and you’ll find it in an instant.

I rarely organize stuff into fine-grained folders anymore due to the power of this one simple to use feature in OS X.

Sometimes, though, I want to know where a found document is — here’s a cool trick to do just that, sent to us from Cult of Mac reader Ivan Manzanilla.

image: http://cdn.cultofmac.com/wp-content/uploads/2014/04/hot-stuff-filepath-640×449.jpg

hot stuff filepathFirst, activate Spotlight with the Command-Space keyboard shortcut or click on the magnifying glass icon in the upper right of your Mac’s screen.

Type in the name or date of the document you want to find, and then hover your mouse over it in the Spotlight results list and you’ll get a full preview of that document’s first page, or an icon for the application or folder you found.

Now, hit the Command key on your keyboard. A little caption will appear under the preview. At first, it will show you the name of the document (a little less useful if you found it via name). Wait a few seconds and it will change to something more meaningful – the full file path of the document you brought up. If you hit Enter while the Command key is still held down, you’ll go right to the file in the Finder.

Pretty slick, right?
Read more at http://www.cultofmac.com/273623/spotlight-potential-see-full-file-path-found-documents-os-x-tips/#GPvo4htfjUKPkufY.99

How to enable writing to NTFS hard drives for free in Mac OS X (including Yosemite!)

 

The most convenient thing is Paragon with some money.

http://www.paragon-software.com/home/ntfs-mac/

Otherwise, there is a way to save your pocket money with the following tutorial stealing from the following site.

Source from: http://www.macbreaker.com/2014/06/how-to-enable-writing-to-ntfs-hard.html

 

Windows uses the NTFS file system for its hard drives. Mac OS X can read files on NTFS hard drives, but it can’t write files to them, which is a glaring omission. Attempting to drag a file into an NTFS drive in Mac OS X will only result in your mouse cursor turning into an error sign. Since many Hackintoshes dual-boot Windows and Mac OS X, being unable to share files between hard drives can lead to a lot of problems with file management. Fortunately, you can enable NTFS writing on OS X with relatively little trouble– all it takes is a few drivers and 10 minutes of your time.
This mini-guide merely repeats what we said in our last article about enabling NTFS write capabilities in Mac OS X, from back in 2012. Of course, a bit has changed since then. Nowadays, you can actually just skip third-party drivers altogether by enabling Apple’s native NTFS drivers through Terminal instead. Despite these developments, however, we still recommend that you follow this guide and install third-party drivers anyways. It’s simpler, and you don’t need to use Terminal. (Here at MacBreaker, we have a policy of avoiding the use of Terminal whenever possible.) This solution is compatible with every version of Mac OS X since Snow Leopard, including Lion, Mountain Lion, Mavericks, and even Yosemite.

UPDATE (October 27, 2014): Yes, this still works on OS X Yosemite! You may have to update OSXFuse, but that’s it.

UPDATE (September 12, 2014): Niresh (Hackintosh Zone) has combined the 3 separate drivers listed in this guide into a single all-in-one NTFS driver package, which is quicker and easier to install. However, the download process on Niresh’s website is a bit convoluted, so it’s up to you whether you want to try his new driver package, or just stick to the current method detailed in this guide (either way, the results are the same).

1. Install FUSE for OS X
Download and install OSXFUSE on your computer. While it won’t enable NTFS write in Mac OS X by itself, FUSE is a necessary “building block” for pretty much any Mac driver that deals with third-party file systems (including the NTFS file system).

DOWNLOAD: FUSE for OS X

While installing FUSE for OS X, be sure to check the “MacFUSE Compatibility Layer” option in the installer. You’ll need it for the next step, in which we install the NTFS-3G driver– that driver hasn’t been updated in a while, so it needs this extra compatibility layer to work properly.

2. Install NTFS-3G
Next, download and install NTFS-3G. This is the driver that will actually enable NTFS write capabilities on your computer.

DOWNLOAD: NTFS-3G

During the installation process, you’ll be given an option to install the NTFS-3G driver with either “No caching” or “UBLIO caching”. While it probably won’t actually matter, you may want to choose “No caching” to be safe. Either way, can always change this setting afterwards. Then, once the installation is finished, reboot your computer.

 

Back in the days of Mac OS X Snow Leopard, you could simply install this driver by itself (along with MacFUSE, the predecessor to OSXFUSE), and then Mac OS X would have NTFS writing capabilities automatically. Unfortunately, development of NTFS-3G has since stopped, which is why we need to do a bit of extra work to make everything run right.

3. Install fuse-wait
The first time you boot into Mac OS X after installing NTFS-3G, you’ll probably be bombarded with error messages about your hard drives. Technically, this means that NTFS-3G is working correctly; you should now be able to write files onto your NTFS drives in Mac OS X. However, you’ll probably want to get rid of these annoying error messages. To do that, download and install the fuse_wait patch for NTFS-3G.

DOWNLOAD: fuse_wait

Once fuse_wait is installed, that’s all there is to it! You should now be able to write files onto NTFS hard drives in Mac OS X, seamlessly and without any errors. Congratulations!